What decides how long the coating lasts?
The coating's life depends on how well the coil was prepared, the site environment and how the coil is maintained afterwards.
| Factor | Effect |
|---|---|
| Surface preparation | Alkaline wash, de-rusting and Radiant+ Prime passivation before coating give the adhesion the coating needs |
| Environment | Coastal salt, industrial pollution and heavy dust are harder on any coil |
| Maintenance | Routine light cleaning keeps the surface performing; ask RCT which cleaning methods suit coated coils |
| Physical damage | Fins bent or scraped during other works lose protection at that spot |
What is the coating, and why does it last?
Radiant+ E3 is a water-based, direct-to-metal coating about 10–15 microns thick that bonds to aluminium and copper fins.
Its super-hydrophobic, foul-resistant surface sheds condensate and resists dust and biofilm, which slows the corrosion and fouling that degrade untreated coils. How Radiant+ E3 works.
How does the coating extend equipment life?
Coils that stay clean and corrosion-free keep compressors at lower pressures and shorter run times, which reduces wear and breakdowns.
In field projects, hot-weather breakdowns fell by about 80% after treatment, and owners deferred equipment replacement by two to three years. See the Radiant+ E3 project results and whether coil coating saves energy.
Frequently asked questions
Does the coating need to be reapplied?
Not for at least five years in most conditions. RCT can inspect coils and measure performance to decide when retreatment is worthwhile.
Is the coating safe?
Yes. It is water-based, VOC-free and non-toxic.