Project case studies

Energy saving case studies: measured results from real HVAC projects

Before-and-after results from laboratories, supermarkets, restaurants, factories, hotels, hospitals and metro stations — each with the equipment, the measurement method, the period and the numbers.

Radiant+ E3 coil coating: what has it saved?

Radiant+ E3 restores and protects condenser and evaporator coils. Measured results range from 12% to 28% lower energy in the field, and full recovery of corrosion losses in an independent CSIRO laboratory test.

  1. +12.5%EER vs corroded coil

    CSIRO laboratory test, Newcastle NSW, Australia

    Daikin split system, corroded then coated, tested to AS/NZS 3823 in a NATA-accredited lab.

    Laboratory · 2021

    Read the case study
  2. 18.5%energy

    Supermarket rooftop units, Dubai, UAE

    Seven rooftop package units; 22,113 kWh saved in 147 days, IPMVP-based dMRV.

    Retail · 2024

    Read the case study
  3. 22.5%energy per day

    Split air conditioner, Petaling Jaya, Malaysia

    Daikin DX split unit in a container cabin office; 9.14 → 7.09 kWh a day.

    Office · 2026

    Read the case study

See all Radiant+ E3 project results

MaxR100 refrigerant performance enhancer: what has it saved?

MaxR100 removes oil fouling from the inside of refrigerant circuits. Projects from 2008 to 2024 recorded 9% to 35% savings across rooftop units, refrigeration and a 1,100-ton chiller.

  1. +26–28%cooling capacity

    Restaurant rooftop units, Jacksonville, Florida, USA

    Five Carrier package units, 62.5 tons; enthalpy method, independent test firm.

    Restaurant · 2009

    Read the case study
  2. 21–24%cooling energy cost

    Two retail stores, Midwest USA

    HVAC and refrigeration, 30.75 tons; ≈80,600 kWh a year saved; payback about 6 months.

    Retail · 2011

    Read the case study
  3. 14.1%kW per TR

    1,100-ton centrifugal chiller, Yangzhou, China

    Trane CVHG chiller, R123; COP 4.72 → 5.50.

    Manufacturing · 2022

    Read the case study

See all nine MaxR100 projects

Aquene heat transfer fluid: what has it saved?

Aquene replaces the water in closed chilled-water loops with a graphene-enhanced heat transfer fluid. Thirteen completed and ongoing projects in six countries record 15% to 31% chiller-plant savings.

See the Aquene project list and awards

AI chiller system: what has it saved?

The AI chiller system adds learning, predictive control to an existing BA system. Audited savings at three metro stations were 40–50%.

  1. 40–50%HVAC electricity

    Xi'an Metro stations, Lines 4, 8 and 14, China

    Chilled-water plants and AHUs under AI control; third-party audit, October 2025.

    Transport · 2025

    Read the case study

See all AI chiller system results

What do the technologies save together in Singapore?

Combining Radiant+ E3, MaxR100 and Aquene on one system adds up their savings. At Singapore's tariff and grid emission factor, a 15% saving on a 1,000 RT water-cooled chiller is worth about S$197,000 and 264 tonnes of CO₂ a year, with payback of about 2.2 years.

  1. ≈2.2 yrpayback at 15%

    Combined treatment of water-cooled and air-cooled chillers, Singapore

    Six study cases, 12 HP DX units to 1,000 RT chillers; S$0.30/kWh, 0.402 kg CO₂/kWh, 7,200 h a year.

    Projection · Singapore basis

    Read the case study

How does RCT measure savings?

Every result on these pages comes from metered or instrument-measured data taken before and after treatment, on the same equipment, with the method and period stated.

Where a report did not include a figure — kWh, dollars or payback — we say so rather than estimate it silently. Where we calculate a figure ourselves, we mark it as RCT's calculation. Site names are withheld where the owner asked for confidentiality.

Ask for a measured trial on your equipment

Find out how much energy your building is losing

Tell us about your chiller plant, AHUs, refrigeration or fleet. We will suggest what to measure first, and whether a grant could fund the work.

WhatsApp us